WAVEFORM¶
Keywords¶
namelist
Short Description¶
Description of WAVEFORM namelist
Waveform Control¶
- TYPE
Waveform type (1=programmed, 2=spike, 3=repeated ramp)
Type 1 Waveform¶
- NCTRL
Number of RMP control points in waveform
- TCTRL
List of RMP control times (ms)
- ICTRL
List of RMP currents at control times (kA)
- PCTRL
List of relative phases of RMP coil currents at control times (units of PI)
Type 2 Waveform¶
- SSTART
Time of start of RMP spike (ms)
- SEND
Time of end of RMP spike (ms)
- SAMP
RMP coil currents at start of RMP spike (kA)
- SPHA
Relative phase of RMP coil currents at start of spike (units of PI)
- SPVE
Phase velocity of RMP coil currents during spike (krad/s)
- BACK
Background RMP coil currents (kA)
Type 3 Waveform¶
- RPERIOD
Repeated RMP ramp repetition period (ms)
- RSTART
RMP coil currents at start of ramp (first ramp starts at t=0) (kA)
- REND
RMP coil currents at end of ramp (kA)
- RPHA
Relative phase of RMP coil currents during ramp (units of PI)
NTM Trigger¶
- MPOL
Poloidal mode number of NTM whose triggering is under investigation
- AMIN
Minimum amplitude of applied type 2 RMP spike (kA)
- AMAX
Maximum amplitude of applied type 2 RMP spike (kA)
- DA
Resolution to which trigger amplitude determined (kA)
- PSTART
Minumum duration of applied type 2 RMP spike (starts at SSTART) (ms)
- PEND
Maximum duration of applied type 2 RMP spike (ms)
- DP
Difference between durations of applied type 2 RMP spikes (ms)
- FSTART
Minumum phase velocity of applied type 2 RMP spike (starts at SSTART) (kA)
- FEND
Maximum phase velocity of applied type 2 RMP spike (kA)
- DF
Difference between phase velocities of applied type 2 RMP spikes (kA)